Vendor: Spiritus Systems
Type: Flaps & Pouches
Price: 11.95

The Pangolin Flap is a multi-purpose pouch closure that can be used in conjunction with the SPUD Pouch, Micro Fight Chassis, or other 3^rdparty products. They will attach to any pouch or magazine holder with a loop field on the front.

The flap features a multi-directional laser-cut scrim pattern that allows it to wrap and form around irregular objects when pulled tight. This reduces equipment slop when secured in the pouch. Pangolin Flaps are sold individually but can be run in groups in the Micro Fight Chest Rig System by securing them between the elastic magazine inserts, and the chassis.

WARNING: This product is ONLY compatible with the Micro Fight MK5 MK4 and MK3 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches.

Vendor: Spiritus Systems
Type: Flaps & Pouches
Price: 119.95

The MUFF is a stowable, sub-abdominal handwarmer designed in collaboration with our friends over at WRMFZY. It was built to remedy to the pain of operating in cold temperatures, and having nowhere for hands to retreat to in between fine motor skill tasks. Unlike much bulkier offerings, The MUFF is designed to be compact and stay out of your way when not in use. It also features a multi-purpose gear pocket, so the wearer does not have to sacrifice as much valuable storage real estate on the body in exchange for maintaining finger dexterity in the winter.

***No plate carrier, accessories, or attachments included. Includes the handwarmer pouch and waist strap only.***

The MUFF can be mounted to the bottom of a Spiritus Systems plate carrier or chest rig system using the integrated hook & loop tab, or as a standalone waist pack when used with the included waist strap. The MUFF features a compressible main compartment that is lined with Polartec Wind Pro ® and capped on both sides with an elastic cuff that helps seal in heat and keep out wind when in use. The outer shell is a combination of stretch woven and Cordura for a functional mixture of comfort, and abrasion resistance in high-wear areas.

The MUFF can be stowed by folding in the cuff edges and then rolling up the primary compartment until the two zipper halves meet and can be connected. Re-deploying is a quick and easy single-zip process.

Vendor: Spiritus Systems
Type: Chest Rig Accessories
Price: 49.95

The Fat Strap MK4 is a universal H-harness solution designed to work with the Micro Fight Chassis, 34 A Split Chest Rig, and Thing 2 expansion chassis. This reduced profile design now includes an updated Squadron overlay panel with more horizontal mounting points for PTTs and other equipment, as well as shock cord holes for mounting other kit. A loop field patch on the back completes the Straps for placement of name tapes or IR Markers. Brilliance in the Basics means that we constructed these without complicated yoke systems or unnecessary features. 

The Fat Strap MK4 is a single strap. You do NOT need to order two to complete your Micro Fight or 34A Split Chest Rig. You only need to order ONE. 

NOTE: The FAT STRAP is part of the Spiritus Systems Micro Fight and 34A Chest Rig Systems. This item does not include the chassis, back strap, magazine inserts, or any other accessories. 

Some images are shown with optional accessories, sold separately.

Vendor: Spiritus Systems
Type: Chest Rig Accessories
Price: 11.95

It's pretty simple: if you have a Micro Fight Chest Rig, you're going to need this. The Back Strap provides the retention necessary to keep the Chassis close to your body. The back strap attaches to the lower buckles on your Micro Fight Chest Rig and wraps around your lower back. 

This strap can also be used as a sling if you wish to carry your Micro Fight in a cross-body configuration as a "Go Bag." The Micro Fight Back Strap has a maximum adjustment of 36 inches and a minimum adjustment of 8 inches. 

NOTE: The BACK STRAP is part of the Micro Fight Chest Rig System. This item does not include the chassis, shoulder straps, magazine inserts, or any other accessories. The BACK STRAP is a necessary component of the Micro Fight Chest Rig System when running as a stand-alone system and highly suggested on a plate carrier.

Some images shown with optional accessories, sold separately.

Vendor: Spiritus Systems
Type: Plate Carrier Accessories
Price: 94.95 - 105.95 (6 variants)

NOTE: This LV/119 Cummerbund is designed for use with a front O V E R T and rear O V E R T or C O V E R T LV/119 plate bag.

The TUBES™ MOLLE Cummerbund was designed to be a lightweight and simple load carriage solution for the LV/119 series of vests.

Using the widely adopted MOLLE system, the cummerbund offers almost infinite configurations for mission needs by utilizing any MOLLE accessory that can be found on the market. 
The cummerbund is designed to allow simultaneous use of the same MOLLE cell for products mounted on the inside and outside of the cummerbund.

The TUBES™ MOLLE Cummerbund is a great option for those who are in and out of their vest frequently and have experienced wear and tear on their Velcro attachment vests. It is also a great option for those who are wearing their equipment in and around water.

The TUBES™ MOLLE Cummerbund features the officially licensed First Spear TUBES™ Attachments systems developed by and officially licensed from First Spear.

The TUBES™ MOLLE Cummerbund is Berry Amendment Compliant materials sourced from industry leaders in textiles manufacturing.

Cummerbund Attachment

The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds, as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for a few reasons.

1. There is no external mounting that can get snagged or rip off when exiting vehicles in haste.

2. The design creates a smooth profile when worn underneath clothing.

3. Velcro is not utilized as an attachment method on the rear plate bag. Velcro wears out over time and is a generally less-than-optimal attachment method when not supported in other ways. Velcro doesn't handle weight well and it sticks to everything, especially cloth seats.

4. Every front plate bag comes standard with sewn loops on the sides for attaching First Spear TUBES™ for use with our TUBES™ cummerbund.

Sizing
The cummerbund comes in two sizes: Size 1 and Size 2, each offering up to 14 inches of total adjustment. This allows for a proper fitment for a wide variety of body types.

To figure out appropriate sizing, take your measurement of the waist at the belly button. When measuring, users should dress as they would while actually wearing the carrier. For example, if the user is operating in arctic environments, they should be wearing cold weather equipment when measuring.

Size 1: 28" to 42"

Size 2: 40" to 54"

If your waist measurement is 42", we suggest going up to the Size 2 cummerbund.

Review the LV-119 Operator Guide for more info on cummerbund installation and sizing.

SOLD AS A SET.

-

NOTE: The LV119 Cummerbund is part of the LV119 Plate Carrier System. This item does not include a Front Plate Bag, Rear Plate Bag, Shoulder Covers, Placards, or any other accessories. Additional components are required for proper use.

Some images shown with optional accessories, sold separately.

Vendor: Spiritus Systems
Type: Plate Carrier Accessories
Price: 67.95 - 74.95 (6 variants)

NOTE: This LV/119 Cummerbund is designed for use with a front and rear LV/119 plate bag.

The MOLLE HLT Cummerbund was designed to be a lightweight and simple load carriage solution for the LV/119 series of vests.

Using the widely adopted MOLLE system, the cummerbund offers almost infinite configurations for mission needs by utilizing any MOLLE accessory that can be found on the market. 

The cummerbund is designed to allow simultaneous use of the same MOLLE cell for products mounted on the inside and outside of the cummerbund.

The MOLLE HLT Cummerbund features premium, Berry Amendment Compliant materials sourced from industry leaders in textiles manufacturing.

Cummerbund Attachment

The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds, as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for a few reasons.

1. There is no external mounting that can get snagged or rip off when exiting vehicles in haste.

2. The design creates a smooth profile when worn underneath clothing.

3. Loop is not utilized as an attachment method on the rear plate bag. Velcro wears out over time and is a generally less-than-optimal attachment method when not supported in other ways. Velcro doesn't handle weight well and it sticks to everything, especially cloth seats.

Sizing

The cummerbund comes in two sizes: Size 1 and Size 2, each offering up to 14 inches of total adjustment. This allows for a proper fitment for all body types.

To figure out appropriate sizing, take your measurement of the waist at the belly button. When measuring, users should dress as they would while actually wearing the carrier. For example, if the user is operating in arctic environments, they should be wearing cold weather equipment when measuring.
 

Size 1: 28" to 42"

Size 2: 40" to 54"

If your waist measurement is 42", we suggest going up to the Size 2 cummerbund.

Review the LV-119 Operator Guide for more info on cummerbund installation and sizing.

SOLD AS A SET.

-

NOTE: The LV119 Cummerbund is part of the LV119 Plate Carrier System. This item does not include a Front Plate Bag, Rear Plate Bag, Shoulder Covers, Placards, or any other accessories. Additional components are required for proper use.

Some images shown with optional accessories, sold separately.

Vendor: Spiritus Systems
Type: Flaps & Pouches
Price: 84.95

The Multi-Platform Radio Chassis (MPRC) Mk5 is a modular and scalable approach to radio retention that can accommodate a wide range of radio models. The chassis is a three-part system that allows the internal dimensions of the MPRC to expand and contract as needed. With this wide fitment range, almost any radio model can be properly secured and ventilated while maintaining the full range of functions on the handset.  

The chassis backer is a semi-rigid board that can be mounted to body armor, chest rigs, and packs using its two MOLLE columns, or on the waist via the integrated belt pass-through. The board is stiff enough to provide a firm mounting surface for any radio and keep it immobile regardless of size.

The base of the MPRC Mk5 is a tri-flap battery cup that is MOLLE adjustable for height on the front of the chassis backer. The MOLLE interface provides users with a wide range of adjustability without sacrificing any durability or structural integrity in the chassis. The tri-fold flaps enable the user to swap batteries without removing the radio or unplugging any wires and can be resecured with an additional layer of redundancy via the fastex buckle that runs through the front.

The top strap can be threaded through the chassis backer in one of two slots to further accommodate the wide variety of radio sizes, and will help the user configure the MPRC Mk5 so that it does not impede buttons or toggles on the handset.

Recommended Radios for use with the MPRC Mk5:

• Persistent Systems MPU5
• L3/Harris AN/PRC-163
• L3/Harris AN/PRC-152
• Thales AN/PRC-148
• Motorola XTS 5000
• Motorola APX 8000
• Motorola APX 7000

Smallest Recommended Radio Compatibility dimensions*
5.5” Tall  - 2.75” wide  - 1.25” Deep

Largest Recommended Radio Compatibility dimensions*

12+” Tall  - 4” wide  - 4” Deep

*These dimensions can be further expanded or retracted via micro adjustments to the Veclro on the battery cup and top strap.

Vendor: Spiritus Systems
Type: Plate Carriers
Price: 79.95 - 89.95 (6 variants)

NOTE: The LV/119 C O V E R T Rear Plate Bag requires a Front Bag and Cummerbund for proper operation.

The LV/119 C O V E R T Rear Plate bag is a slick no frills solution for those who need to wear hard plates in the lowest profile possible. A 3" tall velcro loop panel is sewn at chest height for IR identifiers, patches or even our jumbo flags. The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for two reasons: 1. It doesn't have external mounting that can get snagged or rip off when exiting vehicles in haste. 2. It creates a smooth profile when wearing underneath clothing.

The LV/119 Plate Carrier System was designed to be a scalable and highly configurable plate carrier platform. The system will offer accessories ranging from Covert Low Visibility Operations, to High Threat Direct Action Raids. We designed the system to be issued in entirety to operators who can then select the desired configuration to meet their mission requirements. All parts and accessories will be interchangeable throughout the series.

Plate Fitment

The carrier was designed to fit the United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates that do not fall within the measurements listed.

Medium - 9.5" x 12.5"

Large - 10" x 13.25"

Extra Large - 11" x 14.00"

Thickness- MAXIMUM of 1.20"

Review the LV-110 Operator Guide for more info on plate carrier system installation and sizing.

-

NOTE: The LV119 Rear Plate Bag is part of the LV119 Plate Carrier System. This item does not include a Front Plate Bag, Cummerbund, Shoulder Covers, Placards, or any other accessories. Additional components are required for proper use.

Some images shown with optional accessories sold separately.

Vendor: Spiritus Systems
Type: Plate Carriers
Price: 115.95 - 125.95 (9 variants)

NOTE: The LV/119 O V E R T Front Plate Bag requires a Rear Bag and Cummerbund for proper operation.

The LV/119 SYSTEM is a group of products that work together to give end-users the ability to scale their equipment to their current needs. The fact that this is a cohesive system means that users can mix and match accessories in most cases. For example: One could take a C O V E R T Front or Rear Plate bag and use it with an O V E R T Front and Rear Plate Bag. Users may also also cross pollinate cummerbunds, shoulder covers, and other parts that will be available. The SYSTEM encompasses many parts, some of which are currently available and some that are in development, such as Back Panels of various types, MOLLE cummerbunds, First Spear TUBES™ integrations, and different placards.

The O V E R T shares the same profile as the C O V E R T plate bags but with modifications that make it more suitable for high profile operations. The front bag features a 3 Row / 4 Column MOLLE field that doubles as a 6” x 3” Velcro Field. This may be used to attach End User Devices (EUDs), such as those made by KAGWERKS or Juggernaut Defense. The Velcro may be used to mount placards, patches, and IR identifiers. The MOLLE can also be used to mount administrative pouches, frag grenade pouches, or anything else users may require quick need access to. Every front plate bag comes standard with sewn loops on the sides for attaching First Spear TUBES™ for use with our TUBES™ cummerbund.

Placard and Chest Rig Integration

All LV/119 Plate Bags offer placard and chest rig integration via removable 1 Inch ITW NEXUS Buckles. These clips are removable, allowing users to reduce the signature of the plate bag if it is being worn under a cover shirt or being utilized in a low-profile role.

Push To Talk Support

Each O V E R T front plate bag comes standard with a PTT/Porkchop Loop on either side.

Communication Cable Routing

The Modern Warfighter and Law Enforcement Officer has a radio. To date, the majority of manufacturers have not taken end-user communications needs into their design considerations - we endeavor to break that paradigm.  The O V E R T front bag offers open shoulders to facilitate commo cable routing inside the plate bags and over the shoulders. It also offers small routing points by the 1 Inch ITW NEXUS buckles on the chest - easily accommodating PTT cable routing.

Plate Fitment

The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates that do not fall within the measurements listed.

Medium - 9.5" x 12.5"

Large - 10" x 13.25"

Extra Large - 11" x 14.00"

Thickness - MAXIMUM of 1.20"

Review the LV-119 Operator Guide for more info on cummerbund installation and sizing.

-

NOTE: The LV119 Front Plate Bag is part of the LV119 Plate Carrier System. This item does not include a Rear Plate Bag, Cummerbund, Shoulder Covers, Placards, or any other accessories. Additional components are required for proper use.

Some images shown with optional accessories, sold separately.

Vendor: Spiritus Systems
Type: Flaps & Pouches
Price: 33.95

The Full Flap allows for coverage of the entire front General Purpose Pocket of the Micro Fight Chassis. The Full Flap configuration is perfect for users who wish to use the front pocket as a GP Pouch or when pistol mags are simply not needed.  

Using the Full Flap is easy. Simply attach the 2 inch strip of Velcro in between your magazine insert and the Chassis wall on the inside of the main pouch on your Micro Fight. Then fold the Full Flap over to cover the entire length of the General Purpose Pocket. 

Note: This product works with the Mk2, Mk3 and Mk4 Micro Fight Chest Rigs. 

Some images shown with optional accessories, sold separately.

Vendor: Spiritus Systems
Type: Plate Carriers
Price: 115.95 - 125.95 (9 variants)

NOTE: The LV/119 O V E R T Rear Plate Bag requires a Front Bag and Cummerbund for proper operation.

The LV/119 SYSTEM is a family of products that work together to give end-users the ability to scale their equipment to their current needs. The fact that this is a cohesive system means that end-users are able to mix and match accessories in most cases. For example: One could take a C O V E R T Front or Rear Plate bag and use it with an O V E R T Front and Rear Plate Bag. Users may cross pollinate cummerbunds, shoulder covers, and other parts that will be available. The SYSTEM encompasses many parts, some of which are currently available and some that are in development. These include Back Panels of various types, MOLLE cummerbunds, First Spear Tubes™ integrations, and different placards.

The LV/119 O V E R T Rear Plate bag was built for those who need a scalable vest to wear in a multitude of environments ranging from Low Visibility to Direct Action. The O V E R T shares the same profile as the C O V E R T plate bags, while possessing additional features that make it more suitable for high profile operations. The rear plate bag features full integration of our Recovery Handle™. The rear bag also features minimal MOLLE webbing and Zippers for future integrations with our Zip-on panels that will be available later this year.

Full integration of SS Recovery Handle™.

NOTE: the Recovery Handle™ is NOT included with this product.

Back Panel Support

The rear bag also features minimal MOLLE webbing and Zippers for integrations with our Zip-on panels. Note: The back panel integration is proprietary and will not support other brands of back panels.

Communications Cable Routing.

The Modern Warfighter and Law Enforcement Officer has a radio. To date, the majority of manufacturers have not taken end-user communications needs into their design considerations - we endeavor to break that paradigm. The O V E R T offers open shoulders to facilitate commo cable routing inside the plate bags and over the shoulders. Cables may also be routed through the cummerbund access.

Cummerbund Attachment

The cummerbund attachment is a proprietary system that allows for the use of all of our cummerbunds as well as allowing for a wide range of adjustment. The cummerbund attaches inside the plate bag, which is advantageous for a few reasons.

1. There is no external mounting that can get snagged or rip off when exiting vehicles in haste.

2. The design creates a smooth profile when worn underneath clothing.

3. Velcro is not utilized as an attachment to the rear plate bag. Velcro wears out over time and is a generally less-than-optimal attachment method when not supported in other ways. Velcro doesn't handle weight well and it sticks to everything, especially cloth seats.

4. Every front plate bag comes standard with sewn loops on the sides for attaching First Spear TUBES™ for use with our tubes cummerbund.

Plate Fitment

The carrier was designed to fit United States Standard Issue SAPI cut plates, but it will fit other cuts as well as long as they fit within the specifications listed below. The bags were built to accommodate "thicker" plates, but they will not fit plates that do not fall within the measurements listed.

Medium - 9.5" x 12.5"

Large - 10" x 13.25"

Extra Large - 11" x 14.00"

Thickness - MAXIMUM of 1.20"

Review the LV-119 Operator Guide for more info on plate carrier system installation and sizing.

-

NOTE: The LV119 Rear Plate Bag is part of the LV119 Plate Carrier System. This item does not include a Front Plate Bag, Cummerbund, Shoulder Covers, Placards, or any other accessories. Additional components are required for proper use.

Some images shown with optional accessories, sold separately.